MONOFILAMENT SUMMARY
How to use the below data.
Well it all depends on what your looking for.
Looking for the line with the highest breaking strain to diameter ratio? Look at the “Tensile Rank”. This is a number that is calculated based on the cross sectional area of the line and its average max breaking strain.
Best Abrasion resistance? Check out the Abrasion % of maximum which gives a Percentage of the lines maximum strength that i will break at when in contact with an abrasive surface. Same goes for FG Knot % of Maximum.
Maybe your interested in the diameter of a specific line to see how much you can fit on your reel? For that, check out the “Measured Diameter” column.
Summary of Tested Monofilament
| Brand | Name | Line Type | Overall Ranking | Rated (lbs) | Break Max (lbs) | Quoted Diameter (mm) | Ave Measured Diameter (mm) | Tensile Rank | Abrasion Break (lbs) | Abrasion % Rank | FG Break (lbs) | FG % Rank |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Seaguar | Blue Label | Fluorocarbon | 3 | 40.0 | 60.75 | 0.62 | 0.637 | 6 | 32.39 | 7 | 58.64 | 3 |
| Seaguar | InvisX | Fluorocarbon | 4 | 20.0 | 23.84 | 0.41 | 0.425 | 12 | 12.19 | 8 | 22.70 | 4 |
| Yo-Zuri | H.D. CARBON DISAPPEARING PINK | Fluorocarbon | 1 | 50.0 | 61.55 | 0.65 | 0.746 | 1 | 39.51 | 2 | 57.15 | 6 |
| Zukibo | 100% Fluorocarbon | Fluorocarbon | 2 | 12.0 | 12.59 | 0.29 | 0.293 | 8 | 7.07 | 6 | 12.54 | 1 |
| Zukibo | 99% Fluorocarbon | Fluorocarbon | 6 | 35.6 | 51.43 | 0.60 | 0.611 | 10 | 19.97 | 17 | 42.04 | 7 |
| Zukibo | Fluorocarbon | Fluorocarbon | 4 | 14.8 | 16.62 | 0.33 | 0.342 | 9 | 7.22 | 13 | 16.15 | 2 |
Tensile Strength
Tensile Strength is defined as “the resistance of a material to breaking under tension” and is calculated by combining the diameter of the line and the force required to break it. This means that no matter what diameter the line is or what tension it breaks at, you can compare 2 completely different lines to see which one has a stronger construction.
The graphs below show a summary of all the braids and their respective test results.
They have been grouped in 4 different ways:
- Mono Ranking – This is an overall ranking based on the monofilaments’ maximum tensile strength, and then the percentage of that maximum break obtained for the Abrasion and FG Knot tests.
- Maximum Tensile Strength – All tests expressed as a tensile strength in PSI
- Abrasion – This is the percentage of the maximum break number in pounds that each braid obtained for the Abrasion test
- FG Knot – This is the percentage of the maximum break number in pounds that each braid obtained for the FG Knot test